Mechanical Engineering

Mechanical Engineering

STAFF PUBLICATION : (in Journal) :

S.Sundaram, A.Kalaiyarasan, C.Srinivasan (2018) ‘Design and Analysis of Bipolar Plate for 500w Pem Fuel Cell Stack’ American Journal of Engineering and Applied Sciences, Science Publications. This open access article is distributed under a Creative Commons Attribution (CC-BY) 3.0 license. DOI: 10.3844/ajeassp.(2018).

R.Boopathi, S.Sundaram, C.Senthilkumar, M.Prabu, ‘Investigation on electrode vibration behavior of Machining Characteristics in nano- TiC mixed an EDM machining performance’ Journal of the Balkan Tribological Association , vol.23, No.3, ISSN :1310 -4772, pp 0001-0016, (2017).

P Kanakarajan , S. Sundaram , A Kumaravel , R Rajasekar “Prediction of the surface roughness and wheel wear of modern ceramic material (Al2O3) during grinding using multiple regression analysis amodel.” Indian Journal of Engineering & Materials Sciences Vol. 24, pp. 182-186, June 2017.

R.Boopathi, S.Sundaram, C.Senthilkumar, M.Prabu, ‘Effect of machining characteristics of nano-TiC mixed dielectric fluids on Inconel 718 in the EDM process’ Materials Testing, Vol. 59, No 4. Pages: 402–408, (2017). 

V.L.Raja, A.Kumaravel, S.Sundaram, ‘Effect of Inorganic Fillers on the Friction Properties of Polyamide 66’ Journal of Advances in Chemistry, Volume 12, Number17, pp 5026 to 5030, (2016).

Periyasamy Kanakarajan, Sengottuvelu Sundaram, Arumugam Kumaravel,  Rathanasamy Rajasekar,  Ramasamy Venkatachalam, “Acoustic emission testing of the machining performance of Sic grinding wheel shaped Al2O3 ceramics” Materials Testing, Vol. 58, No 10. Pages: 908–912, (2016).

R.Boopathi, S.Sundaram, C.Senthilkumar and M.Prabhu, “ Investigation on the effect of brass and copper electrodes during electric discharge machining of Inconel 718 using Nano particles mixed dielectric fluid” Journal of Chemical and Pharmacetical sciences, Vol.7, pp 08 – 11.ISSN : 0974 – 2115, (2015).

R.Boopathi, S.Sundaram, C.Senthilkumar and M.Prabhu “Optimation of EDM parameters for Inconel 718 using response surface methodology” International Journal of Applird Engineering Research, Vol 10, No 50, pp 526 -529, (2015).

Sundaram .S and Vetri Chelvan .G, “Titanium Alloy Subjected To Tensile Testing Under Ambient And Cryogenic Conditions Using Acoustic Emission Techniques” AGU International Journal of Engineering and Technology Vol.No. 1, PP – 1-17, (2015).

Sundaram .S and Vetri Chelvan .G,(2015) “A study on Acoustic Emission response of Titanium alloy subjected to tensile testing under ambient and Cryogenic condition”, International Journal of Applied Engineering Research, Volume 10, Number 5, pp – 12557 – 12569, (2015).

Boopathi.R and Sundaram . S, “Influence of Process Parameters for Electrical Discharge Machine using Nano Particle and Brass Electrode”, International Journal of Research in Advent Technology, Vol.2, No.11, November 2014 PP-(45-49), (2014).

Boopathi .R,Sundaram. S, C.Senthilkumar and M.Prabu, “Multiobjective Optimization of Nano Powder Mixed Electrical Discharge Machining of Inconel 718”, International Journal of Applied Engineering Research, Vol.10, No.08, 2014, PP-(5976-5979), (2014).

Kanakarajan.P, Sundaram.S, Kumaravel.A, Rajasekar.R, and Sathish Kumar .P, Acoustic emission testing of surface roughness and wear caused by grinding of ceramic materials. Materials Testing: Vol. 57, No. 4,pp.337-342.doi: 10.3139/120.110714, (2015).

Dr. P. Suresh, L.Francis Xavier, P.Tamilazhagan, M.Vignesh, D.Gokul Nath, ‘Design and fabrication of miniaturized gear pump by rapid prototyping techniques’, International Journal of Applied Engineering Research, Vol. 10 No.85 (2015).

Dr. P. Suresh, L.Francis Xavier, J. Saravanakumar, Yuvaraj Yeswanth, ‘Drilling of Aluminium Metal Matrix Composite using Automatic Coolant System’, International Journal of Applied Engineering Research, ISSN 0973-4562 Vol. 10, No.85 (2015).

Dr. P. Suresh, L. Francis Xavier,  ‘Wear behavior of Aluminum Metal Matrix Composite prepared from Industrial waste’, The Scientific World Journal, Volume 2016 (2016), Article ID 6538345.

Dr. P. Suresh, L. Francis Xavier, ‘Studies on dry sliding wear behavior of aluminium metal matrix composite prepared from discarded waste particles’, International Journal of Advanced Engineering Technology, Article in press.

Dr. P. Suresh, L. Francis Xavier, R. Balaragavendheran, P. Yeshwanth Kumar, S. Deepak, ‘Studies on the influence ofdrilling cycle on the surface roughness of the drilled holes’, ARPN Journal of Engineering and Applied Sciences, Vol. 11, No. 2, 2016.

Dr.P.Suresh, N.Subramani Dr.J.Ganeshmurali, Dr.R.Kesavan, ‘Enhancement Of Aluminium 2024 Properties By Reinforcing With Alumina and Graphite’, International Journal of Applied Engineering Research, Vol.10 No.85 (2015).

Dr.P.Suresh, R.Masilamani P.Tamilazhagan, N.Madhavan, S.Ponnuswamy, ‘Design And Analysis of High Density Polyethylene Fuel Tank For Heavy Vehicle’, International Journal of Innovative Research in Science, Engineering and Technology, Vol 4, Issue 1.

Dr.P.Suresh, R.Masilamani J.Saravanakumar, K.Gowtham, S.Deepak, ‘Prediction of Fatigue Life Cycle On Steering Knuckle Ball Joint’, International Journal of Innovative Research in Science, Engineering and Technology, Vol.4, Issue 1.

Dr.P.Suresh, R.Meenakshi, ‘Tribological Behavior of Refractory and Reactive Metal Carbide Reinforced Copper Composites’, International journal of Advanced Engineering Technology.

Dr.P.Suresh, N.Sundaram, ‘Ergonomic Analysis of Human Knee Joints during Manual Material Handling Using Soft Computing Techniques’, Journal of Pure and Applied Microbiology, Vol 8.

Dr.P.Suresh, E.Punarselvam, ‘Ergonomic Analysis of Human Lumbar Spine Image Using Canny Edge Detection Algorithm’, Journal of Pure and Applied Microbiology, Vol 8.

Dr.P.Suresh, S.Senthilkumar, ‘Analysis of Virtual Robot Movements for Performance Improvements in Personal Communication’,Springer Online Publication Wireless Personal Communications, pp 1-14.

Dr.P.Suresh, E.Punarselvam, ‘Ergonomic Analysis of Biomechanical MRI Scan Lumbar Spine Image and Human Vertebrae Injuries Using Canny Edge Detection Algorithm’, International Journal of Applied Engineering Research, Vol.10 No.46 (2015).

Dr.P.Suresh, N.Nithyanantham, ‘Evaluation of Cast Iron Surface Roughness Using Image Processing and Machine Vision System’, ARPN Journal of Engineering and Applied Sciences, Vol. 11, No. 2, 2016.

Dr.P.Suresh, S.Sathishkumar,  S.Rameshkumar, Dr.N.V.Dhandapani, ‘Emission Characteristics of Bio-Fueled Diesel Engine Using Fuel Additives’, International Journal of Applied Engineering Research, Vol.10 No.85 (2015).

Dr.P.Suresh, K.M.Pugezhendhi, ‘Testing and Evaluation of Bio – Materials: A Review’, International Journal of Applied Engineering Research, Vol.10 No.85 (2015).

Dr.P.Suresh, Dr.N.V.Dhandapani, S.Saravana Kumar S.Sivanandham, ‘A Study of Field Failure Analysis of an Automotive Vehicle Chassis with Finite Element Analysis and Validate Through Theoretical Approach‘, International Journal of Applied Engineering Research, Vol.10 No.85 (2015).

Dr.P.Suresh, C.V.Ravindran, ‘A Study on “Make India” by Focusing on Opportunities and Key Challenges’, Advances in Economics and Business Management, Vol.3, Issue 1.

Dr.P.Suresh, Hariharan Ganesan, ‘Green Purchasing of Personal Care Products’, Advances in Economics and Business Management, Vol.3, Issue 1.

Dr.P.Suresh, Mehaladevi, ‘A Study on Occupational Stress in Private and Public Sector Bank Employees with Special Reference to Coimbatore District’, Advances in Economics and Business Management, Vol.3, Issue 1.

Dr.P.Suresh, M.Madhavakrishnan, ‘Recent Developments in Wire EDM’, Journal of Mechanical Engineering & Technology, Vol.4, Issue 1.

Dr.P.Suresh, R. Aravinth, ‘Experimental Investigation On Elastic Deformation of Passenger Car Bumper Using Thermoplastic and Elastomeric Materials Blends’, International Journal of Innovative Research in Science, Engineering and Technology (IJIRSET), Vol.5, Issue – 4.

Dr.P.Suresh, T.Rajeshkumar, E.Vignesh, ‘Analysis of Human spine Image Using Finite Element Modelling, International Journal of Innovative Research in Science, Engineering and Technology (IJIRSET), Vol.5, Issue – 4.

Dr.P.Suresh, C.Saravanan, J.Anish Jafrin Thilak, N.Subramani, ‘Stress Analysis on Human Shoulder Joint During MMH using Soft Computing Technique’, International Journal of Innovative Research in Science, Engineering and Technology (IJIRSET), Vol.5, Issue – 4.

Dr.P.Suresh, J.Anish Jafrin Thilak, M.Rajesh, ‘Study and Analysis of polymer’, International Journal of Innovative Research in Science, Engineering and Technology (IJIRSET), Vol.5, Issue – 4.

Dr.P.Suresh, S.Dinesh, J.Anish Jafrin Thilak, T.Rajeshkumar, ‘Analysis of human Knee Joint During MMH Using Soft Computing Technique’, International Journal of Innovative Research in Science, Engineering and Technology (IJIRSET), Vol.5, Issue – 4.

Dr.P.Suresh, Sachu George Benny, Abu Zuhaib Kandapath, N.Subramani, ‘Experimental Investigation on Aluminium Alloy 6061-T6 Using Multi Profile tool By Friction Stir Welding’, International Journal of Innovative Research in Science, Engineering and Technology (IJIRSET), Vol.5, Issue – 4.

Dr.P.Suresh, Amal Thomas, N.Subramani, ‘Performance Analysis of Thermal Barrier Coating on Piston’, International Journal of Innovative Research in Science, Engineering and Technology (IJIRSET), Vol.5, Issue – 4.

Dr.P.Suresh, J.Anish Jafrin Thilak, N.Subramani, T.Rajeshkumar, ‘Ergonomics Analysis of Functional Lumbar Spine during Manual Lifting of Loads using ANSYS Software’, International Journal of Innovative Research in Science, Engineering and Technology (IJIRSET), Vol.5, Issue – 4.

J.Anish Jafrin Thilak, Dr.J.Ganesh Murali, Dr.P.Suresh, V.V.Arunsankar, N.Subramani, ‘Analysis of Centrifugal Pump with Closed Type Impeller for Slurry Operations, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 6, Issue 1, January 2017.

J.Anish Jafrin Thilak, Dr.P.Suresh, N.Subramani S.Sathishkumar, V.V.Arunsankar, ‘Application of RFID Technique in Supply Chain Management’, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 6, Issue 1, January 2017.

J.Anish Jafrin Thilak, Dr.P.Suresh, N.Subramani, S.Sathishkumar, V.V.Arunsankar, ‘Demosaicing and Sharpening of Color Filter Captured Images using Adaptive Transformation, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 6, Issue 1, January 2017

J.Anish Jafrin Thilak, N.Subramani, Dr.P.Suresh, S.Sathishkumar, V.V.Arunsankar, ‘Review of various Image Processing Techniques’, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 6, Issue 1, January 2017

J.Anish Jafrin Thilak, S.Sathishkumar, N.Subramani, Dr.P.Suresh, V.V.Arunsankar, ‘Microstructure Analysis of Cast Iron using Mathematical Morphology’, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 6, Issue 1, January 2017.

J.Anish Jafrin Thilak, Dr.J.Ganesh Murali, Dr.P.Suresh, N.Subramani, V.V.Arunsankar, ‘Analysis of Supply Chain Model for Optimum Question paper Delivery system Using Genetic Algorithm with Simulated Annealing’, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 6, Issue 2, February 2017.

J.Anish Jafrin Thilak, Dr.P.Suresh, N.Subramani, S.Sathishkumar, V.V.Arunsankar, ‘Image Processing and Segmentation of Human Eye for Prediction of IRIS’, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 6, Issue 2, February 2017

J.Anish Jafrin Thilak, S.Sathishkumar N.Subramani, Dr.P.Suresh, S.Rameshkumar, ‘Experimental Analysis of Human Functional Spinal Unit Using AUTOCAD’, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 6, Issue 2, February 2017

J.Anish Jafrin Thilak, N.Subramani, Dr.P.Suresh, S.Sathishkumar, V.V.Arunsankar, ‘Analysis of Human Neck Image Using Pro/E and MATLAB’, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 6, Issue 2, February 2017

J.Anish Jafrin Thilak, N.Subramani, Dr.P.Suresh, S.Sathishkumar, V.V.Arunsankar, ‘Investigations and Analysis of Performance Characteristics of IC Engines, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 5, Issue 12, December 2016.

J.Anish Jafrin Thilak, S.Rameshkumar1, N.Subramani, Dr.P.Suresh, S.Sathishkumar, ‘Speckle Noise Removal in MRI Scan Image Using WB – Filter’, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 5, Issue 12, December 2016

J.Anish Jafrin Thilak, N.Subramani, Dr.P.Suresh, S.Sathishkumar, V.V.Arunsankar, ‘Edge Detection of MRI Scan Neck Image Using Canny Edge Detection Algorithm Based on Density of Edge Length’, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 6, Issue 2, February 2017.

T.Yuvaraj, Dr.P.Suresh, ‘Effect Of Cu/Zn On Material Removal Rate On Grey Cast Iron’, Journal Of Advances In Chemistry, Vol.12, No.23, December 2016.

N.Subramani, Dr.P.Suresh, Dr.J.Ganesh Murali, V.V.Arunsankar, ‘Review on Hybrid Composite Materials And Its Applications’, International Research Journal Of Engineering And Technology, Volume: 04 Issue: 02, Feb -2017.

Abu Zuhaib Kandappath, Dr.P.Suresh, J.Anish Jafrin Thilak, N.Subramani, ‘Impact Analysis on Composite Propeller Shaft’, International Journal for Research and Development in Technology, Vol.7, Issue.3, March 2017.

Amal Thomas, Dr.P.Suresh, J.Anish Jafrin Thilak, N.Subramani, ‘Impact Analysis on Composite Helmet by Using FRC and Glass Fiber by Using ANSYS’, International Research Journal of Engineering and Technology, Vol.4, Issue.3, March 2017.

Amal Thomas, Dr.P.Suresh, J.Anish Jafrin Thilak, N.Subramani, ‘A Review on FSP and its Reinforcements in Making Composite Materials’, International Journal for Scientific Research and Development, Vol.5, Issue.2, April 2017.

Dr.N. Natarajan, Impact of the Shape of Electrode-Tool on Radical Overcut of Micro-Hole in Electrochemical Micromachining , Surface Engineering and Applied Electrochemistry, Springer, ISSN 0973-4562, Volume 4,  Issue 6  Apr-2017

Dr.N. Natarajan, Dry Sliding Wear Behavior of WC and Cr-C Coatings on Plain Carbon P/M Steel Substrates Using HVOF Coating Method, ISSN 0973-4562, Volume 4,  Issue 6  Apr-2017.

V.L.Raja, A.Kumaravel, S.Sundaram, Effect of Inorganic Fillers on the Friction Properties of Polyamide 66, Journal of Advances in chemistry ISSN 2321- 807X  Vol 12 pp. 5026-5030,  Nov (2016).

Prabakaran J, Gopal S, Kannan K, Ramesh P, Palanisamy S “Study the Effect of Surface Treatment on the Mechanical Behaviour Of Natural Fiber Composites”, International Journal of Emerging Technology & Research ISSN (E): 2347-5900 ISSN (P): 2347-6079 , Volume 3, Issue 6, Nov - Dec, 2016

J.Prabakaran, S.Gopal, K.Kannan, P.Ramesh, S. Muralidharan  “Study the Mechanical Properties of Hybrid Reinforced Epoxy Composites ”, International Journal for Innovative Research in Science & Technology, ISSN (online): 2349-6010,Volume 3,Issue 07,December 2016

M. Soundarrajan, R. Thanigaivelan, M. Maniyarasn , M. Mohan Raj,  Analysis of Fuel Properties and Emission Behaviour of Biodiesel, International Journal for Innovative Research in Science & Technology, Volume 3 | Issue 06  ISSN (online): 2349-601006 November 2016.

S.Vijayakumar, M.Soundarrajan, S.Palanisamy, K.Pasupathi, Studies on Mechanical Properties of Al-Sic Metal Matrix Composite, International Journal of Material Science and Engineering (SSRG-IJMSE) volume 2 Issue6 November to December 2016.

A.Kalaiyarasan, C.Srinivasan, R.Ramesh, S.Sasidharan, S.Palanisamy, Oxidation of Soot Particles in Diesel Exhaust Emission using Plasma Source, IJSRD - International Journal for Scientific Research & Development| Vol. 4, Issue 09,pp.112-115, 2016.

S.Vijayakumar, M.Soundarrajan, S.Palanisamy, K.Pasupathi. Studies on Mechanical Properties of Al-Sic Metal Matrix Composite, SSRG International Journal of Material Science and Engineering (SSRG-IJMSE) Volume-2 Issue-6, 2016.

Kalaiyarasan A and Sankareswaran N. Design And Analysis of Drive Shaft By Different Reinforcement Material In Metal Matrix Composite, International Journal of Recent Scientific Research, Vol. 7, Issue, 8, ISSN 12921-12924, August, 2016.

Prem J, Raghupathi P and Kalaiyarasan A Analysis of Magnesium Alloy Wheel for Four Wheeler, International Journal of Recent Scientific Research, Vol. 7, Issue, 8, pp. 13126-13130, August, 2016

C.Srinivasan, S.Vijayakumar A.Kalaiyarasan K.Pasupathi, S.Sasidharan. Experimental Investigation on Vibration Characteristics of Jute Fiber Reinforced Composite Material IJSRD - International Journal for Scientific Research & Development| Vol. 4, Issue 08, | ISSN (online): 2321-0613 (2016).

A.Kalaiyarasan C.Srinivasan  R.Ramesh S.Sasidharan S.Palanisamy  Oxidation of Soot Particles in Diesel Exhaust Emission using Plasma Source, IJSRD - International Journal for Scientific Research & Development| Vol. 4, Issue 09,  ISSN (online): 2321-0613 2016.

Kalaiyarasan A, Sankareswaran N Finite Element Analysis of Drive Shaft Aluminium Based MetalB Matrix Composite Reinforced with Sic and Al2 O3. International Journal for Scientific Research & Development, Vol. 2, Issue, 5, ISSN 2395-1990, 2016.

Kalaiyarasan A Ragupathi P Prem J, Karthikeyan K, Dynamic Analysis of Drive Shaft by using Alimunium [Al7075] based Metal Matrix Composite Reinforced with B4C and Al2O3 IJSRD - International Journal for Scientific Research & Development| Vol. 4, Issue 08, | ISSN (online): 2321-0613 (2016).

Kalaiyarasan A,  P.Ragupathi, J.Prem, M.Gokul, Based Metal Matrix Composites : A Review Influence of Reinforced Particles; Techniques; Factors Affecting the Composite, International Journal of Scientific Research in Mechanical and Materials Engineering Vol. 1, Issue 1, | (2016).

G. Pradeep Kumar,  R. Thanigaivelan, RM. Arunachalam, & P.Paramasivam. Experimental investigation of EDM Processing parameters on Machining Al6063-12% Sic-5% Gr using Response surface methodology, High Temperature Material Processes, Vol 18(1–2), 27–43 (2014).

R.Thanigaivelan, R.Arunachalam and N.Natarajan. Study on Influence of Electrodes in Electric Discharge Machining, Recent Patents on Mechanical Engineering, Vol 4, pp. ,2015.

R.Thanigaivelan, M.Ranjithkumar, L.Rohinikarthick, A.Shahjahan B.Tamilarasan K.Gunasekaran. Effect of Tool Electrode Tip Shape on Machining Rate and Overcut in Electrochemical Micromachining (EMM), International Journal of Innovative Research in Science Engineering and Technology, Vol 4, pp. 1594-1603, 2015.

R.Thanigaivelan, E.Susindran, S.Shanmugaraj, E.Ramachandran, K.Gunasekaran. Parameter Optimization Model in Electrochemical Micromachining Process, International Journal of Innovative Research in Science Engineering and Technology, Vol 4, pp. 1602-1607, 2015.

R.Thanigaivelan, S.Praveen, T.Ragul, M.Selvamani, K.Gunasekaran. Influence of EDM Parameters on Taper Angle Generation Using Different Electrodes, International Journal of Innovative Research in Science Engineering and Technology, Vol 4, pp. 1608-1615, 2015.

R.Thanigaivelan, T.Mythili, P.Sathishkumar, A.Tamizhazhagan, Vigneshraj. Development of on Board Weighing System Using Sensor in Static Truck, International Journal of Innovative Research in Science Engineering and Technology, Vol 4, pp. 581-589, 2015.

N.Srinivasan, N.Natarajan, P.Manikandan, K.Senthil Kumar. Energy Efficient Air Conditioning System Design and Equipment Selection for Building, International Journal of Applied Engineering Research, Vol 10, pp. 9242-9248, 2015.

P.Samivel, N.Natarajan, K.Dinesh, Rajkumar Murugesan. Emission Reduction in SI Engine using Ethanol-Gasoline Blend on Thermal Barrier Coated Pistons, International Journal of Applied Engineering Research, Vol 10, pp. 9304-9311, 2015.

S.Palinivel, N.Natarajan, K.Sakthivel, N.Jawahar. The Contour Method for Residual Stress Determination Applied to an AA6063-AA8011 Friction Stir Butt Weld, International Journal of Applied Engineering Research, Vol 10, pp. 9316-9323, 2015.

P.Stephen Antony Predeep, S.Sivason raja, C.Rammurugan, R.SenthilKumar. Optimizing the Method of Work Holding Device- Drill Jig with Adjustable Drill Bush, International Journal of Innovative Research in Science Engineering and Technology, Vol 4, pp. 561-564, 2015.

K. V. Hariharan, S.P. Pradeep kumar, M.Prasanth, R. Senthil Kumar. Design and Fabrication of Tapioca Planter, International Journal of Innovative Research in Science Engineering and Technology, Vol 4, pp. 565-570, 2015.

T.G.Arul, G.Vasanthkumar, K.Thambidurai, M.Sakthivel. An Experimental and Emission Analysis of Single Cylinder Diesel Engine Test with Hydraulic Loading by Using Ethanol, International Journal of Innovative Research in Science Engineering and Technology, Vol 4, pp. 1568-1574, 2015.

T.G.Arul, M.Anash Naina Mohamed, K.Kumaravel, P.Chiranjeevi, An Experimental and Emission Performance Analysis of Single Cylinder S.I. Engine Test with Electrical Loading by Using Alternative Fuels, International Journal of Innovative Research in Science Engineering and Technology, Vol 4, pp. 1575-1580, 2015.

T.G.Arul, N.Pramoth, S.Praveen kumar, R.Preamkumar, A.Rameshkumar, An Experimental and Fabrication of Miniature Steam Power Plant, International Journal of Innovative Research in Science Engineering and Technology, Vol 4, pp. 1581-1587, 2015.

Nagendiran.B, Tamilselvan.G, Tamilselvan.S, Tamilvanan.R. Feasibility Study and Acceleration of Biogas from Kitchen Waste, International Journal of Innovative Research in Science Engineering and Technology, Vol 4, pp. 1588-1590, 2015.

Sivanantham.K, Banuchandar.N, Hariprakash.K, Jeeva.M.  Air Operated Vehicle by Using Compressed Air from Suspension, International Journal of Innovative Research in Science Engineering and Technology, Vol 4, pp. 1591-1593, 2015.

T.Kirubagaran, D.Murugesan, A.Naveenkumar, J.Prabakaran. Analysis of Mechanical Properties of Mudar/Coir Hybrid Vinylester Composite Materials, International Journal of Innovative Research in Science Engineering and Technology, Vol 4, pp. 1616-1622, 2015.

Ranjithkumar A, Sankar S, Sridar.S, J.Prabakaran. Fabrication of Pneumatic Vehicle By Using Inversion of Slider Crank Mechanism, International Journal of Innovative Research in Science Engineering and Technology, Vol 4, pp. 1623-1629, 2015.

P.Samivel, S.Gopal, J.Prabakaran, K.Kannan.  Investigate The Effect Of Mechanical And Water Absorption Behavior Of Kenafand Banana Fiber Reinforced Composites For Sustainable Development, Journal of Applied Engineering Research, Vol 10, pp. 9324- 9330, 2015.

K.Kannan, S.Harikannan, V.Arun, R.Anusundar, S.Ashokraj. Analysis of Mechanical Properties of Jute & Banana Fibre Reinforced Vinyl Ester Composites, International Journal of Innovative Research in Science Engineering and Technology, Vol 4, pp. 1630-1638, 2015.

S.Harikannan, K.Kannan, V.Arun, R.Anusundar, S.Ashokraj. Fabrication and Analysis of Thermo Plastics Welding, International Journal of Innovative Research in Science Engineering and Technology, Vol 4, pp. 1639-1648, 2015.

Karthick.R, Mukesh.K, Kuttimani.C, Muralidharan.S. Fabrication and Property Evaluation of Kenaf-Jute Fiber Reinforced Composites, International Journal of Innovative Research in Science Engineering and Technology, Vol 4, pp. 1649-1655, 2015.

P.Ramesh, J.Ayyamperum, P.Boopathi, V.M.Gokulakannan. Analysis of Mechanical Properties of Silk/Flax Hybrid Epoxy Composite Material, International Journal of Innovative Research in Science Engineering and Technology, Vol 4, pp. 1656-1662, 2015.

M.Santhosh, S.Sathish kumar, A.Selvamani, P.Paramasivam. Experimental Design and Fabrication of Hydraulic Rod Bending Machine, International Journal of Innovative Research in Science Engineering and Technology, Vol 4, pp. 1663-1667, 2015.

R. Rajamanickam, K .Thanasekaran, G .Prabu, S.Gopal, Optimization of Surface Roughness For Turning Operation in Lathe Using Taguchi Method, International Journal of Innovative Research in Science Engineering and Technology, Vol 4, pp. 1668-1674, 2015.

Prem kumar G, Ragu M, Sivakumar R, Sasidharan S. Characterization of Cu Chips Producing Through High En ergy Ball Milling, International Journal of Innovative Research in Science Engineering and Technology, Vol 4, pp. 1675-1679, 2015.

M.Ravindran, S.Sekar, N.Velmurugan, V.Vinothkumar. Vibrational Characteristics of Kenaf &Coir /Epoxy Hybrid Composite, International Journal of Innovative Research in Science Engineering and Technology, Vol 4, pp. 1680-1686, 2015.

S.Karthick, C.Manoj, P.Nandhakumar, M.Maniyarasan. Fabrication and Evaluation of Mechanical Properties of Kenaf &Coir Hybrid Composite, International Journal of Innovative Research in Science Engineering and Technology, Vol 4, pp. 1803-1807, 2015.

C.Srinivasan, D.Arunkumar, M.Ashokkumar, K.Gokul. Experimental Investigation of Mechanical Properties of Glass Fiber, Sisal and Banana Fiber Reinforced Polymer Composite, International Journal of Innovative Research in Science Engineering and Technology, Vol 4, pp. 1824-1828, 2015.

T.G.Arul, C.Arumugam. Implementation of Lean Manufacturing Technique in Indian Manufacturing Industries, International Journal of Innovative Research in Science Engineering and Technology, Vol 4, pp. 1847-1853, 2015.

S.Vijaya Kumar, S.K. Thenadayaal, V.P. Vasanth, V. Vasantha kumar, Design and Analysis of Two Wheeler Connecting Rod, International Journal of Innovative Research in Science Engineering and Technology, Vol 4, pp. 1884-1889, 2015.

S.Vijaya Kumar, Amit Kumar Singh, Athul Sabu, Mohamed Farhan.P. Generation of Electricity by Using Exhaust from Bike, International Journal of Innovative Research in Science Engineering and Technology, Vol 4, pp. 1877-1883, 2015.

G.Vijayprabu, C.Krishnamoorthy, T.S.Ashok Kumar, G.Keerthisan. Design and Implementation of CNG – LPG Powered Hybrid Vehicle, International Journal of Innovative Research in Science Engineering and Technology, Vol 4, pp. 1890-1893, 2015.

P.Raja, N.Arun, R.Kavin, R.Faisal Rahman. Design and Implementation of Electric Hybrid Vehicle, International Journal of Innovative Research in Science Engineering and Technology, Vol 4, pp. 514-521, 2015.

Ragavendhiran S, Sathishkumar S, Yogeswaran C, S.Palanisamy. Wireless Control Quadcopter with Self-Balancing System, International Journal of Innovative Research in Science Engineering and Technology, Vol 4, pp. 525-529, 2015.

D.Deepa, A.Ashok, R.Muthukumar, S.Prasanth. Bio Energy from Organic Waste, International Journal of Innovative Research in Science Engineering and Technology, Vol 4, pp. 571-574, 2015.

D.Deepa, T.Mythili, K.Anbalagan, M.Bharathi Raja, C.Kamal. Production of Bio Diesel from Rice Bran Oil International Journal of Innovative Research in Science Engineering and Technology, Vol 4, pp. 575-580, 2015.

M.Gokul, S.Samraj, A.Samidurai, A.Thirupathi. Analysis and Fabrication of Mechanical Properties of Banana and Sisal Hybrid Composites, International Journal of Innovative Research in Science Engineering and Technology, Vol 4, pp. 591-597, 2015.

A.Anandhakumar, S.Ganesan, S.Goutham, K.Pasupathi. Design and Fabrication of Hovercraft, International Journal of Innovative Research in Science Engineering and Technology, Vol 4, pp. 597-601, 2015.

G.Vadivel, G.Vijayakumar, M.Sivakumar, K.Pasupathi. Performance and Analysis of Fin Heat Exchanger, International Journal of Innovative Research in Science Engineering and Technology, Vol 4, pp. 602-605, 2015.

Venkatesh.k, Priyanka K, Sridhar R, Sakthivel A. Fabrication and Analysis of Lawn Mower, International Journal of Innovative Research in Science Engineering and Technology, Vol 4, pp. 606-610, 2015.

D.Denesh kumaar, S.Palanisamy. Stress Analysis of Washing Machine Drum, International Journal of Innovative Research in Science Engineering and Technology, Vol 4, pp. 610-614, 2015.

G.Pradeep Kumar, P.Rajkumar, M.Soundarajan, V.Gokulraj, A.Dinesh, M.Inderajith. An Experimental Investigation of Machinability of Stainless Steel 316 Using Brass Electrodes, International Journal of Innovative Research in Science Engineering and Technology, Vol 4, pp. 640-649-1574, 2015.

G. Pradeep kumar,  P.Rajkumar , M.Soundarajan, K.Gouthaman , S.Karthikeyan , J.Mohanraj. An Experimental Investigation of Machinability of Stainless Steel 316 Using Stainless Steel Electrodes, International Journal of Innovative Research in Science Engineering and Technology, Vol 4, pp. 649-657, 2015.

G.Pradeep kumar,  P.Rajkumar, S.Muralidharan , Vijaykumar P, Sabariganesh R, Sakthivel C. Optimization of EDM Parameters for Welded Dissimilar Grades of Stainless Steel, International Journal of Innovative Research in Science Engineering and Technology,Vol 4, pp. 658-663, 2015.

M.Goku, T.G.Arul, K.Venkatesh. Optimizing Tool Wear in CNC Milling Machine by using machine vision Technology, International Journal of Applied Engineering Research, Vol 10, pp. 9290- 9294, 2015.

G.Arulmurugan, K.Venkatesh, M.Gokul, Design and Analysis of Coil Fin Heat Exchanger, International Journal of Applied Engineering Research, Vol 10, pp. 9295- 9299, 2015.

M.Soundarrajan, K.Pasupathi, N.Srinivasan, M.Prasanna Vengatesh. Experimental Investigation of Resistance Spot  Welding of Duplex Stainless Steel,  International Journal of Applied Engineering Research, Vol 10, pp. 9256- 9260, 2015.

M.Soundarrajan, K.Pasupathi, N.Srinivasan, M.Prasanna Vengatesh. Experimental Investigation of Resistance Spot  Welding of Duplex Stainless Steel,  International Journal of Applied Engineering Research, Vol 10, pp. 9256- 9260, 2015.

 M.Maniyarasan, P.Manikandan, Shalin Antony.  Fabrication and Thermal Analysis of Luffa Epoxy Based Composites, International Journal of Applied Engineering Research, Vol 10, pp. 9256- 9260, 2015.

P.Rajkumar, S.Murulidharan, B.Nagendiran, M.Parthipan and K.Sivanantham. Optimization of Micro Electrical Discharge Machining Parameters of Ti-6Al-4V, International Journal For Scientific Research & Development, Vol-2, pp 130-134, 2015.

S.Vijaya Kumar, C.Srinivasan, P.Paramasivam and M.Maniyarasan. Parametric Optimization of Electric Discharge Drilling Machine Using Al-SiC Metal Matrix Composite, International Journal of Science, Engineering and Technology Research, Vol-4 Issue-1 2015.

M.Soundarrajan, K.Venkatesh, P.Ramesh and K.Pasupathi. Energy efficient air conditioning system design and equipment selection for building, International Journal for Scientific Research & Development, Vol. 2, pp.286-291, 2015.